Overview
The Gamut Mapping controls are identical to those of the Gamut Mapping group of the Color Space Transform and similar to those of the Color Management panel of the Project Settings. It offers tone mapping and gamut mapping that expand or contract image contrast and saturation with no clipping.
Where to find this node
- Effects Library:
Tools > Color > ColorFX > Gamut Mapping - Quick add: right-click in the Node Editor →
Add Tool > Color > ColorFX > Gamut Mapping
Inputs
- Input (orange) - the primary 2D image.
- Effect Mask (blue) - a mask that limits the adjustment to the pixels inside the mask.
Setup
MediaIn → Gamut Mapping → 2D processing node or Merge
Controls tab
- Gamma
- the gamma the clip is supposed to have. Set it to match the image (it may match the Timeline Color Space, depending on how you work).
- Tone Mapping Method
- None (no tone mapping, a simple 1:1 mapping), Clip (hard clips all out-of-bounds values), Simple (a simple curve between approximately 5500 nits and 100 nits; an HDR source above 5500 nits may still clip), Luminance Mapping (same as DaVinci, but more accurate when all your media is in a single standards-based color space such as Rec. 709 or Rec. 2020), DaVinci (smooth roll-off and controlled desaturation of the most extreme values; useful for wide-gamut camera media and when mixing cameras), Saturation Preserving (smooth roll-off without desaturating dark shadows and bright highlights).
- Sat. Rolloff Start
- with Saturation Preserving, the threshold in nits (cd/m2) at which saturation starts to roll off along with highlight luminance.
- Sat. Rolloff Limit
- with Saturation Preserving, the threshold in nits (cd/m2) at which the image is totally desaturated.
- Max Input/Output Luminance
- these sliders specify the minimum and maximum luminance of the input image in nits. Together, they set which value of the Input Gamma is mapped to which value of the Output Gamma.
- Average Input Luminance
- compensates for large differences in visual adaptation between a bright image viewed on an HDR display and the same image on an SDR display. For most "average" images, a value between 0 and 10 works best. For very bright images (a snow scene at noon), a higher value yields more detail in the highlights.
- Gamut Mapping Method
- choosing Saturation Mapping remaps the saturation values of the image and enables two sliders:
- Saturation Knee
- the level at which saturation remapping begins. Below it, nothing is remapped. A value of 1.0 is maximum saturation in the selected output color space.
- Saturation Max.
- the new maximum level to which all saturation values above the Saturation Knee are raised or lowered. A value of 1.0 is maximum saturation in the selected output color space.
- Advanced
- Apply Forward OOTF (converts the image from scene referred to display referred) and Apply Inverse OOTF (converts from display referred to scene referred).
Use cases
- Move to a color space with a dramatically larger or smaller dynamic range, with tone mapping and no clipping.
- Move to a dramatically larger or smaller gamut by remapping saturation, with no clipping.
