Overview
The Chromatic Aberration Removal is adjusted by color pairs: Red/Cyan, Green/Purple and Blue/Yellow. The Show Estimated Fringes checkboxes display an alignment guide that visually isolates each type of fringing against gray.
Where to find this node
- Effects Library:
Tools > Color > Revival > Chromatic Aberration Removal - Quick add: right-click in the Node Editor →
Add Tool > Color > Revival > Chromatic Aberration Removal
Inputs
- Input (orange) - the primary 2D image.
- Effect Mask (blue) - a mask that limits the adjustment to the pixels inside the mask.
Setup
MediaIn → Chromatic Aberration Removal → 2D processing node or Merge
Controls tab
- Advanced Options
- additional parameters for problem shots.
- Lens Center
- Center X and Y parameters offset the center of the lens, useful for a reframed and re-rendered shot.
- Stronger Correction
- shows the location of image features that resemble fringing.
- Estimation Options
- used solely to highlight and identify areas of fringing, with no effect on the final output. They are only available when one of the Show Estimated Fringes boxes is checked in the Aberration Correction section.
- R/C, G/P, B/Y Balance
- adjust the balance between the colors of each pair to better identify hard to see fringing.
- Brightness
- magnifies the fringe indicators displayed when an Estimated Fringes checkbox is on.
- Aberration Correction
- the manual correction controls.
- R/C, G/P, B/Y Scale
- eliminate the fringing of each color pair.
- R/C, G/P, B/Y Edge
- compensate for the difference in fringing due to the curvature of the lens edges.
- Show Estimated Fringes
- shows just the estimated fringes over a gray background and activates the Estimation Options sliders.
Tips
- Check Show Estimated Fringes: with the fringes isolated against gray, it becomes easy to correct them manually with the Scale and Edge controls, pair by pair (Red/Cyan, Green/Purple, Blue/Yellow).
